ATI AV004A-002 RACING BYPASS VALVE (OPEN) WITHOUT HARDWARE

ATI AV004A-002 RACING BYPASS VALVE (OPEN) 

FREE SHIPPING!

THE MOUNTING FLANGE, FITTINGS AND LINE ARE NOT INCLUDED

 

 




 The open race valve vents the air directly to the atmosphere, which can make a loud noise. Depending on where the race valve is located, it can also kick up a lot of road dust. The enclosed race valve is designed to enable a hose to be clamped to it, this allows the air to either be run back into the system or dumped wherever the installer desires. Routing the hose past the firewall quiets down the release of air from the valve.

Brute Speed highly recommends the race valve when boost 14 psi and above.  

 

Importance of Bypass/Surge Valves
Applications utilizing intercooling and those operating at boost
levels in excess of 8 psi will benefit from the use of a bypass
valve (commonly referred to as a “surge” valve). In high RPM,
low load conditions, the supercharger is still operating at full
speed and attempting to deliver full flow. With the throttle
blade(s) at or near the fully closed position, the engine is unable
to accept the airflow from the supercharger. In this event the
pressure builds until the flow attempts to reverse direction and
exit through the compressor, resulting in a harmful condition
known as compressor surge. Installing a bypass valve between
the supercharger discharge and the carburetor/throttle body
prevents damaging compressor surges by diverting the
undemanded charge air to the atmosphere during manifold
vacuum conditions. ATI’s butterfly-type Pro-Flo is well suited
for applications making 750 hp
or less. Applications at
higher power levels are
best suited for use
with our
poppet-style
race valve.

ATI AV004A-002 RACING BYPASS VALVE (OPEN) WITHOUT HARDWARE
Click To Enlarge
  • Item #: ATI AV004A-002
  • Manufacturer: ATI ProCharger (Accessible Technologies Inc)
  • Condition: New
  * Marked fields are required.
Qty*
Price $351.00
Reviews (0) Write a Review
No Reviews. Write a Review