BMR HPP010 68-72 A Body handling performance package

BMR HPP010 68-72 A Body handling performance package

FREE SHIPPING!

BMR Suspension has taken the guesswork out of making significant handling improvements to the 1968-1972 GM A-Body, and put it in one convenient package. Countless hours of design, engineering, and track testing gives you the best combination of parts for improved handling on the street and track. Matching specific components provides a great blend of performance, aesthetics, and comfort.

BMR’s Level 1 Handling Package (HPP010) addresses key points of the suspension to improve the “system.” BMR Suspension designed the HPP010 to work well for street performance and handling applications. BMR’s Level 1 Handling Package is 100-percent bolt-in and require zero cutting, welding, or modification to the chassis or suspension. Whether you simply want a better handling daily driver, or the ultimate track day car, rely on BMR Suspension!

Lowering Springs (SP030)
BMR Suspension believes the right springs go beyond looks—your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.

Blending aesthetics and performance, BMR has designed the SP030 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your 1967-1972 GM A-body 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road.

Sway Bars (SB028)
Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension’s SB028 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, and coil spring rate. Manufactured from heavy-duty, solid 32mm bar stock (front) and solid 1-inch bar stock 9rear), the SB028 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bars are CNC-formed for exact manufacturing tolerances and repeatable high quality. The front sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. The rear sway bar mounts to the rear lower control arm in the factory location.

BMR Suspension designed the SB028 sway bar kit for street performance, autocross, and road race applications. The large sway bars’ increase in rate gives you the ability to drive to and from the road course or autocross and still out handle the competition with the same sway bars. The SB028 front and rear sway bar kit gives you a 400% (front) and 200% (rear) increase in sway bar rate. These rate increases allows you to greatly reduce the body roll of your A-body so you can drive harder through corners. The SB028 attaches to your A-body with 88-durometer polyurethane bushings (front), reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling.

Shocks (BSN-24-131506 -Front, BSN-24-009294-Rear)
Ride, handling and control are what a shock absorber provides. Compromise in one area may create a problem in another. Bilstein's patented design reduces the need for compromise. The rising rate valving of the Bilstein shock absorber provides the necessary damping to react quicker to road conditions without sacrificing ride comfort. This combination of valving and high pressure nitrogen gas keeps the tires in constant contact with the road helping to ensure safety through enhanced control.

Of all a vehicle's suspension components, nothing works harder than the shock absorbers, making it critical to pick the correct ones. Bilstein Gas Pressurized Shock Absorbers are the least expensive, fastest way, to dramatically improve the ride, handling and control of a vehicle.

BMR Suspension’s HPP010 Level 1 Handling Package is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 4-5 hours. Proudly made in the U.S.A.

 - Fits 1968-1972 GM A-Body
- 100% Bolt-on
- Specific combination of parts
- Fully street and track tested
- Increases chassis rigidity
- Greatly improves handling
- Adjustable and non-adjustable components
- Heavy-Duty construction
- Durable powdercoat finish
- 4-5 hour installation time
- Proudly designed in the U.S.A.
- Proudly made in the U.S.A.

 

1968 - 1972 Buick Grand Sport

1968 - 1972 Buick Skylark

1968 - 1972 Chevy El Camino

1968 - 1972 Chevy Chevelle

1968 - 1972 Chevy Malibu

1968 - 1972 Chevy Monte Carlo

1968 - 1972 Oldsmobile Cutlass

1968 - 1972 Oldsmobile 442

1968 - 1972 Pontiac LeMans

1968 - 1972 Pontiac GTO

 
BMR Suspension has taken the guesswork out of making significant handling improvements to the 1968-1972 GM A-Body, and put it in one convenient package
Click To Enlarge
  • Item #: BMR HPP010
  • Manufacturer: BMR Suspension
  • Condition: New
  * Marked fields are required.
Qty*
Price $829.00
Reviews (0) Write a Review
No Reviews. Write a Review