BMR PHR003 82-02 Panhard rod, DOM, double adjustable, rod ends

BMR PHR003 82-02 Panhard rod, DOM, double adjustable, rod ends

PHR003H

PHR003R

Double adjustable allows you to make adjustments without removing the panhard bar

 

Product Name:

Panhard rod, DOM, double adjustable, rod ends

 

Product Description:

A Panhard rod is a suspension link that both locates the lateral position of the rear axle

housing and controls its side-to-side movement. Factory F-Body Panhard rods are

made from weak U-shaped-stamped steel with soft, rubber bushings that allow

excessive deflection under load. BMR Suspension’s PHR003 Panhard rod is made from

1.25-inch diameter, 0.120” wall DOM tubing and TIG-welded chrome-moly tube

adapters. The PHR003 features zinc-plated, X-series, heat-treated chrome-moly, self-

lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom-designed

rod end spacers.

 

BMR Suspension designed the PHR003 to work well for street performance, drag race,

and road race applications. Other Panhard rods include rubber or polyurethane

bushings that will deflect under heavy loads. The heavy-duty construction of the

PHR003 eliminates Panhard rod deflection, giving you much-improved repeatable

handling characteristics on the street, starting line, and corners. The heavy-duty rod

ends are designed to solidly connect the rear axle housing to the body and completely

eliminate deflection. The rod ends allow on-car double-adjustability required for fine-

tuning your set-up and provide bind-free suspension articulation needed for superior

handling. The all-steel design will increase NVH, so the PHR003 is not intended for

everyone. However, this is the perfect Panhard rod for the enthusiast that requires

maximum performance from the suspension. When performance is a must, rely on BMR

Suspension!

 

BMR Suspension’s PHR003 on-car, double-adjustable Panhard rod is available in black

hammertone and red powdercoat for long-lasting good looks. Installation time is about 1

hour. Proudly made in the U.S.A.

 

BMR Suspension offers several Panhard rod options for Third- and Fourth- Gen F-body

vehicles. The PHR001 is a non-adjustable Panhard rod with polyurethane bushings on

both sides. This product is recommended when low cost is the primary consideration.

The PHR002 is on-car adjustable and includes polyurethane bushings on both sides.

This product is the most popular F-body Panhard rod. The PHR003 is double-adjustable

and includes rod ends on both sides. This product is recommended for maximum

performance. The PHR010 is on-car adjustable and includes a polyurethane bushing on

one side and a rod end on the other side. This product is a good compromise between

the PHR002 and the PHR003. The PHR001, PHR002, and PHR003 are all available in

a lightweight, chrome-moly versions (MPHR001, MPHR002, MPHR003).

 

Features:

- Fits 1982-2002 GM F-bodies

- On-car adjustable

- 1 1/4-inch DOM Steel

- Chrome-mole tube adapters

- TIG-welded

- Heavy-duty Viking Performance Teflon-lines rod ends

- Eliminates Panhard Rod deflection

- Designed for street performance, drag race, and road race applications

- Durable powdercoat finish

- 1-hour installation time

- Proudly designed in the U.S.A.

- Proudly made in the U.S.A.

 

PHR003H

Panhard rod, DOM, double adjustable, rod ends

Application: 1993-2002 4th Gen F-Body

Application: 1982-1992 3rd Gen F-Body

Box Dimensions: 48” x 4” x 4”

Shipping Weight: 8 pounds

Department: Chassis & Suspension

Section: Suspension Components

Part Type: Panhard Bars

Brand: BMR Suspension

Rod Ends Included: Yes

Adjustable: Yes

Bushings Included: Yes

Bushing Material: Steel rod end

Bushing Color: N/A

Panhard Bar Material: Steel

Panhard Bar Finish: Black hammertone powdercoated

Quantity: Sold individually

 

PHR003R

Panhard rod, DOM, double adjustable, rod ends

Application: 1993-2002 4th Gen F-Body

Application: 1982-1992 3rd Gen F-Body

Box Dimensions: 48” x 4” x 4”

Shipping Weight: 8 pounds

Department: Chassis & Suspension

Section: Suspension Components

Part Type: Panhard Bars

Brand: BMR Suspension

Rod Ends Included: Yes

Adjustable: Yes

Bushings Included: Yes

Bushing Material: Steel rod end

Bushing Color: N/A

Panhard Bar Material: Steel

Panhard Bar Finish: Red powdercoated

Quantity: Sold individually

 

FREE SHIPPING!!!

 


BMR PHR003 82-02 Panhard rod, DOM, double adjustable, rod ends
Click To Enlarge
  • Item #: BMR PHR003
  • Manufacturer: BMR Suspension
  • Condition: New
  * Marked fields are required.
Qty*
Price $139.95
Reviews (0) Write a Review
No Reviews. Write a Review