FAST 30657-8 GM Gen IV 65lb Fuel Injectors

GM Gen IV Fuel Injectors

LS3/LS7/L76/L92/L99-Type 65 lb/hr (682.5cc/min)

High-Impedance Injectors

All Injectors flow rated at 58 psi. (Stock OE LS operating pressure)

Price is for a set of eight injectors

The FAST™ Precision-Flow™ Fuel Injectors for GM Gen IV engines are the highest flowing injectors available and are uniquely designed for direct installation into LS3/LS7/L76/L92/L99-style engines. Available in two different height configurations and a wide range of flow rates, the injectors are correctly sized (shorter than common LS1/LS6 injectors) and feature the correct EV6/USCAR connector, enabling a hassle-free plug-in operation.

Prior to the arrival of Precision-Flow™ Fuel Injectors for GM Gen IV engines, performance engine builders were required to retro-fit high-flow Gen III (LS1/LS6) injectors which required a wiring harness adapter to fire the injectors. Most importantly, due to the fact that LS2 and LS7 engines feature shorter fuel injectors than other LS engines, when performance injectors were required engine builders would have to modify the fuel rail placement to fit the Gen III (LS1/LS6) style injectors. The new FAST™ Precision-Flow™ Injectors for GM Gen IV engines are simple drop-in components offered in fuel rates up to 57 lb/hr* (LS2–type) & 65 lb/hr* (LS7/L76/L92-type), the highest rate currently available for GM Gen IV engines.


THE TRUTH ABOUT FUEL INJECTORS

FAST Precision-Flow™ fuel injectors deliver the outstanding idle quality, unparalleled flow consistency, and unrivaled durability essential for high-performance EFI engine applications. Engineered to yield faster throttle response, reduced clogging, and superior fuel atomization, Precision-Flow™ fuel injectors are manufactured to the tightest tolerances in the industry and are flow certified to ensure consistent performance. And with a full range of both low and high impedance injectors with fuel delivery rates ranging from 19 to 160 lb/hr, FAST™ can cover any application, street or race!     

 

  • State-of-the-art magnetics improve injector opening times for faster throttle response

  • Precision ground pintle and wide spray angle delivers superior fuel atomization

  • Redesigned valve body resists clogging and improves hot starting

  • High-impedance injector models available up to 60lb/hr for trouble-free OEM computer compatibility

  • Low-impedance* injectors available up to 160 lb/hr for maximum performance with aftermarket EFI systems, such as the FAST™ XFI™ system

*Note: low-impedance injectors can not be used with OEM computers

Think FAST™ for all of your fuel injector needs
FAST™ offers a fuel injector for virtually any application that you can think of.

Low impedance VS high impedance –which do you need?
FAST™ offers fuel injectors in both low and high impedance versions to cover all of your EFI performance needs. So which is the correct impedance to run? As a general rule, you will need to run high-impedance injectors whenever you retain your factory Engine Control Unit (ECU). Failure to use high-impedance injectors with a factory EFI computer will cause severe damage to the ECU, necessitating a costly replacement computer. FAST™ offers high-impedance injectors up to 60 lb/hr, so we’ve got you covered for nearly any performance scenario where you would still want to use your factory computer.

If you are running an aftermarket ECU, such as the FAST™ XFI™ system, low-impedance injectors are the way to go. FAST™ offers a full range of all of the injectors that you’ll ever need to cover any performance scenario -from boulevard cruiser to dragstrip dominator.

PRECISION-FLOW™ FUEL INJECTORS FOR GM GEN IV ENGINES

New FAST™ injectors feature highest flow rate of any injector specifically designed for 2005-2008 LS2/LS7/L76/L92 engines

The FAST™ Precision-Flow™ Fuel Injectors for GM Gen IV engines are the highest flowing injectors available and are uniquely designed for direct installation into LS2 and LS7/L76/L92- style engines. Available in two different height configurations and a wide range of flow rates, the new Precision-Flow™ Fuel Injectors are correctly sized (shorter than the common LS1/LS6 injectors) and feature the correct USCAR connector, enabling hassle-free plug-in operation. In addition, the high-impedance, high-flow FAST™ injectors meet/exceed all factory durability standards and quality tolerances.

Prior to the arrival of Precision-Flow™ Fuel Injectors for GM Gen IV engines, performance engine builders were required to retro-fit high-flow Gen III (LS1/LS6) injectors which required a wiring harness adapter to fire the injectors. Most importantly, due to the fact that LS2 and LS7 engines feature shorter fuel injectors than other LS engines, when performance injectors were required engine builders would have to modify the fuel rail placement to fit the Gen III (LS1/LS6) style injectors. The new FAST™ Precision-Flow™ Injectors for GM Gen IV engines are simple drop-in components offered in fuel rates up to 57 lb/hr* (LS2–type) & 65 lb/hr* (LS7/L76/L92-type), the highest rate currently available for GM Gen IV engines.



4, 6, AND 8 CYLINDER APPLICATION CHART

This chart will cover 95% of all street and track performance scenarios. 45psi of fuel and 1 injector per cylinder is assumed.

 

 

The FAST™ Precision-Flow™ Fuel Injectors for GM Gen IV engines are the highest flowing injectors available and are uniquely designed for direct installation into LS2 and LS3/LS7/L76/L92/L99-style engines.
Click To Enlarge
  • Item #: FAST 30657-8
  • Manufacturer: FAST
  • Condition: New
  * Marked fields are required.
Qty*
Price $390.00
Reviews (0) Write a Review
No Reviews. Write a Review