Monster MCLT1SC7 LT1-S Organic Triple Disc C7 Pkg 1150 whp

Monster MCLT1SC7 LT1-S Organic Triple Disc C7 Pkg 1150 whp

LT1-S ORGANIC TRIPLE DISC C7 PACKAGE - RATED AT 1150 RWHP/RWTQ

Our easiest clutch to drive that will hold a stout 1150 rwhp, and be abused without mercy! This clutch is a fantastic unit that comes complete with all hardware and a billet steel flywheel. The LT1-S Triple has been tested to in excess of 7,500 rpm’s without release issues and can be driven by a 100 lbs person easily. Great for the guys with n/a setups or power adders looking to daily drive their cars or take them to the track, this setup will do it all. *Absolutely no chatter is to be expected of this unit, it will drive factory smooth!

1 = Worse | 5 = Best

Clutch Expectations Rating ( Scale of 1 to 5 )
Street Manners 5
Noise @ Idle 3
Chatter 5
Pedal Effort 5
High RPM Release 5

 

Modifications Rec or Not Rec
Nitrous Recommended
Supercharged Recommended
Turbo Recommended
N/A Stock Cube Recommended
N/A Stroker Recommended

 

Installation Instructions:

https://monsterclutches.com/lt1-triple-install-tips-instructions

 

DOES MY CLUTCH NEED A SHIM?

  • ****YOU ABSOLUTELY MUST MEASURE YOUR SETUP TO MAKE SURE THE TOLERANCES IN YOUR VEHICLE WILL NOT CAUSE RELEASE ISSUES OR POTENTIAL CLUTCH DAMAGE. IF YOU DAMAGE THINGS FROM NOT MEASURING IT WILL NOT BE COVERED UNDER OUR WARRANTY. IF YOU HAVE ANY QUESTIONS ON THIS PLEASE CONTACT US DIRECTLY.**** 

‚Äč

Monster make any thickness shim you can dream of. We like to see no less than a .0625" gap and no more than a .200" gap on our units, ours differ from what most say because our lift/release is different than others. DO NOT TAKE OTHER PEOPLES INFORMATION AS WHAT'S CORRECT FOR US, USE THESE TOLERANCES OR CONTACT US FOR FURTHER EXPLANATIONS. The most common place that shows how to measure for a shim is located HERE, again, every car is slightly different and things can stack against you. This DIAGRAM will help you measure your installation. Further, anyone running a SFI approved bell housing will most definitely need a shim, this is due to the tolerances of these units manufacturing processes.  

 

WHAT IS THE DIFFERENCE BETWEEN A PREMIUM AND BASIC PACKAGE? This is asked from us more than 10 times a day. Short and sweet - Basic Packages include the disc, pressure plate/clutch pack, flywheel, release bearing (on Fbody, GTO, and C5's only), pilot bearing, and alignment tool. The Premium Package includes all of that and a new slave cylinder.
 
 
DO I NEED AN ADJUSTABLE MASTER CYLINDER? The answer to this question will always be no. Any racer or aggressive street driver will benefit from these, anyone who just daily drives their car should know that they will add ~30% stiffness to the pedal effort and will shrink the engagement window, additionally they are not required for our setups.
 
 
CAN I USE AN ADJUSTABLE MASTER CYLINDER? Yes, on every Monster Clutch product except for our billet twins/triples. The reasoning behind this is these units have very, very tight tolerance setups. Because of this these things can be easily overextended and severely damaged. Most of the warranty issues we have with the billet units is from improperly adjusted aftermarket masters. If you're using these setups make absolutely sure they are adjusted every time you install a new clutch, and that adjustment is checked on a regular basis - it's very easy to damage any clutch that is made with an aftermarket master cylinder assembly - not only is this the responsibility of the end user/installer, any damages caused by this are not covered under our warranty.
 
 
CAN I USE ARP HARDWARE? Though we don't necessarily recommend ARP for our units they can used on all of our setups except the LT1 series multi disc clutches, these cannot use ARP bolts as they will absolutely destroy the setup. We've made over 1,800 rwhp on factory hardware without any issues, that said, some want ARP and those guys can do it on most of our units. Please note, you can NOT use lubricant around any friction surface! If you do use ARP bolts DO NOT USE LUBRICANT on the threads, use a liberal amount of red loctite and all will be well.
 
 
IS THE WARRANTY TRANSFERABLE? No, the warranty on Monster Clutches are for the original purchasers only. 
 
 
IS THE "NO QUESTIONS ASKED WARRANTY" OPTION REALLY JUST THAT? Yes, it absolutely is! If you purchase this option you literally have 12 months from the time of purchase to "cash in" on a no questions warranty. You can literally call us and say you don't like the way the clutch looks, literally, we'll replace it without question once we get the old unit back - regardless if you race it, daily drive it, or use it in a random manner. Remember though, this ONLY applies to those who purchase this option, this is not our standard one year warranty.
 
 
WILL RACING MY CAR VOID MY CLUTCH WARRANTY? No, that would completely negate calling these performance clutches... as long as the unit was recommended by us, fits the power that you're making, and isn't being used in a plainly ignorant manner, we'll cover it.
 
 
WHAT WILL VOID MY CLUTCH WARRANTY? This one could be a long one, but, here is the short version. Any fluid contamination, installer error, usage error (yes, this exists), ignorance or irresponsibility, over-powering the unit, under-powering the unit (yes, this exists as well) or not maintaining the unit. If you have an issue just give us a shout and we'll go over things with you in a methodical, technical, and fair way.
 
 
IS MY CLUTCH REALLY MADE IN THE USA? All of our units frictions, pressure plate internals, and flywheels are made right here in the United States, most of this is actually made right here in Texas! That said, we're not going to go into the business of making bearings, slave cylinders, alignment tools, and hardware so it goes without saying these are not US made parts. Though they still go through our process of quality control, it is your right to know what you get. Keep in mind we are one of only a handful of USA made clutch units on the planet, sad but true.
 
 
WHERE CAN I GET INSTRUCTIONS FOR YOUR UNITS? There are links at the top of this page, if you cannot find it shoot us an email at support@monsterclutches.com and we'll get them over as soon as possible.
 
 
WILL MY CLUTCH LEAVE AS SOON AS I ORDER IT? More than likely, no. All Monsters are made to order and typically take 5-7 business days not including holidays/weekends from the time we take your funds to the time it's ready to ship, triple disc units can take up to 14 business days and billet race/custom one-off units can take up to 4 weeks.
 
 
DO YOU SHIP WORLDWIDE? Absolutely! We ship all over the world and have a Monster on every continent that isn't frozen solid. 
 
 
WHO DO YOU SHIP WITH? We proudly ship UPS on all packages. 
Monster MCLT1SC7 LT1-S Organic Triple Disc C7 Pkg 1150 whp
Click To Enlarge
  • Item #: Monster MCLT1SC7
  • Manufacturer: Monster Clutch Co.
  • Condition: New
  * Marked fields are required.
Qty*
Price $1,499.99
Reviews (0) Write a Review
No Reviews. Write a Review