Moser 3M 9", 9 1/2" & 10" Complete Center Section / Third Member

Moser 3M 9", 9 1/2" & 10" Complete Center Section / Third Member

 Free Shipping!

 

Moser Engineering builds the strongest center sections available in the marketplace. Moser gives you many options from a Moser Stock Case to an Aluminum Thru-bolt design all the way up to our Strongest Nodular case that can handle it all. Build the Center Section that you need and get that power to the ground. All our cases are good for street and or strip use.
Moser's Custom built 9", 9 1/2" & 10" FORD Center Sections are completely assembled and shipped in a specially designed plastic case. Solid Pinion Shims are used instead of the weaker crush sleeves. All units are assembled with special calibrated "Torque Guns", which means no impact guns that will hammer and flat spot bearings and no guessing on your pinion nut torque setting! Each pinion is specifically torqued to the gear manufactures stated setting.

All Center Sections are assembled with the following Moser Engineering designed and manufactured in the USA components;
  • Cases
  • Pinion Supports
  • Pinion Yokes
  • Spools
Items that are part of the Center Section that are assembled but sourced from an outside supplier which may or may not be made is the USA;
  • Bearings & Seals
  • Fasteners (all grade 8)
  • Limited Slip Differentials
  • Ring & Pinions (Gears) - Moser Engineering does not manufacture any gears! These are sourced but not limited to the following suppliers; US Gear, Hoosier Gear, Motive/Richmond Gear & Yukon Gear
  • Stealth Series US Gear; "We set out to develop the next generation of aftermarket Ford 9" gears starting with a brand new design and utilizing the best manufacturing processes. Our new 9" Ford STEALTH® Series gears utilize the most advanced gear cutting technology, known as face hobbing. It's a different gear cutting method that creates a continuous and more consistent cut on all teeth of the ring and pinion at the same time. The heel and toe of each gear tooth are now the same height, which helps create a consistent pattern and improves the tooth to tooth contact."
**Light Weight Aluminum Spools and Pinion Yokes are designed to be used in light weight racing applications (<2000 lbs.) only! These items also are considered wear items and should be monitored and replaced periodically.

*This item will ship two business days after online transaction is completed unless you have requested powder coating this service will add an 2 - 3 days to the process.

NOTE: for 35 & 40 Spline Steel Spool applications, if you are replacing a Mark Williams or other manufactures spool check your spline location! The Moser Standard Steel Spools have splines are located inboard not out under the bearings like Mark Williams and other manufactures, your passenger side axle will be too short and not engage the spool. Please select "Pro Steel 40 Spline Spool" at the bottom of the "Differential Options" if you have determined you have a 40 spline spool that fits this criteria.




Moser 3M 9", 9 1/2" & 10" Complete Center Section / Third Member - Free Shipping!
Click To Enlarge
  • Item #: Moser 3M 9" Center Section
  • Manufacturer: Moser Engineering
  • Condition: New
  * Marked fields are required.
*
(+$70.00)
*
*
*
*
*
*
Qty*
Price $1,572.92
Reviews (0) Write a Review
No Reviews. Write a Review