Moser 3M 9" Complete Center Section - Free Shipping!

Moser 3M  9" Complete Built To Order Center Section

 Free Shipping!

 

Moser Engineering builds the strongest center sections available in the marketplace. Moser gives you many options from a Moser Stock Case to an Aluminum Thru-bolt design all the way up to our Strongest Nodular case that can handle it all. Build the Center Section that you need and get that power to the ground. All our cases are good for street and or strip use.

*This item will ship two business days after online transaction is completed unless you have requested powder coating this service will add an 2 - 3 days to the process.

NOTE: for 35 & 40 Spline Steel Spool applications, if you are replacing a Mark Williams or other manufactures spool check your spline location! The Moser Standard Steel Spools have splines are located inboard not out under the bearings like Mark Williams and other manufactures, your passenger side axle will be too short and not engage the spool. Please select "Pro Steel 40 Spline Spool" at the bottom of the "Differential Options" if you have determined you have a 40 spline spool that fits this criteria.


Product Description

Moser's Custom built 9" & 9 1/2" FORD Center Sections are assembled with Timken bearings. Solid Pinion shims are used instead of the weaker crush sleeves. All units are assembled with special calibrated "Torque Guns", which means no impact guns that will hammer and flat spot bearings and no guessing on your pinion nut torque setting! Each pinion is specifically torqued to the gear manufactures stated setting.

All Center Sections are assembled with the following Moser Engineering designed and manufactured components;
Cases
Pinion Supports
Pinion Yokes
Spools

Items that are part of the Center Section that are assembled but sourced from an outside supplier;
Bearings (TImken) & Seals
Fasteners (all grade 8)
Limited Slip Differentials
Ring & Pinions (Gears) - Moser Engineering does not manufacture any gears! These are sourced but not limited to the following suppliers; US Gear, Hoosier Gear, Motive/Richmond Gear & Yukon Gear

**Light Weight Aluminum Spools and Pinion Yokes are designed to be used in light weight racing applications (<2000 lbs.) only! These items also are considered wear items and should be monitored and replaced periodically.

Home grown in Indiana!

Moser has changed their website to reflect the Motul gear oil as their recommended fluid for all gear type LSD’s (this includes Truetrac’s). Gear type units require friction to work properly. Most aftermarket oils have additives that helps to alleviate heat, wear and prolong life. In doing so these additives minimize friction causing gear driven units to be less efficient and sometimes fail completely.

 

Part#                            Description                                   

MUT-100118                 Gear 300 75W90 Synthetic                   

MUT-101161                 Gear Competition 75W140 Synthetic   
 
Moser 3M 9" Complete Center Section - Free Shipping!
  • Item #: Moser 3M 9" Center Section
  • Manufacturer: Moser Engineering
  • Condition: New
  * Marked fields are required.
*
(+$70.00)
*
*
Qty*
Price $1,572.92
Reviews (0) Write a Review
No Reviews. Write a Review