ATI 3GSDR-001 - G8 8 Rib Crank Pulley Bagged Assembly

ATI 3GSDR-001 - G8 8 Rib Crank Pulley Bagged Assembly

ATI 3GSDR-001 - G8 8 Rib Crank Pulley Bagged Assembly Note: Blower bracket, blower and belt are not included. This is for the crank pulley and includes the six required cam locks. Shipping is free! This uses a factory G8 harmonic balancer It...

  • Price: $275.00

ATI PDW01C-230 - Blower Pulley .230 SHIMS (Qty 2)

ATI PDW01C-230 - Blower Pulley .230 SHIMS (Qty 2)

ATI PDW01C-230 - Blower Pulley .230 SHIMS (Qty 2) NOTE: To ensure belt alignment, verify that the supercharger has the proper shim between the supercharger pulley and the input shaft. Proper shim width is 0.200” for the 8 rib pulley (may be two shims with total width of 0.200”)!

  • Price: $7.50

ATI DC033A-018 G8 8 Rib Crank Pulley

ATI DC033A-018 G8 8 Rib Crank Pulley

ATI DC033A-018 G8 8 Rib Crank Pulley Note: Blower bracket, blower and belt are not included. This is for the crank pulley - The six required cam locks are not included, this is for those who need to replace their ProCharger supplied pulley and can reuse their cam locks Shipping is free!

  • Price: $170.00

ATI DC017A-008 98-02 F Body/Transplant 8 Rib Crank Pulley

ATI 98-02 3GJDR-08 8 Rib Crank Pulley

7.65" 8 Rib Crank Pulley Note: Fasteners not included but are optional at the bottom of the page DC017A-008 8 rib LS1 crank pulley Note: Requires ATI Performance Products Balancer 918853 and crank pinning kit, required to install the above...

  • Price: $175.00

CBR 8RIB8.65PLY 98-02 F Body 8 Rib 8.65" Crank Pulley

CBR 8RIB8.65PLY 98-02 F Body 8 Rib 8.65" Crank Pulley

CBR 8RIB8.65PLY 98-02 F Body 8 Rib 8.65" Crank Pulley This Pulley is a direct replacement for the 8 rib 7.65 dia pulley part# ATI DC017A-008 commonly used on 98-02 F-Bodys equipped with LS1 engines using ProCharger brand superchargers. This 8 Rib...

  • Price: $249.99

ATI DPxxx ProCharger Pulley (6 Rib and 8 Rib) w/belt option

Authentic ATI ProCharger Pulley's in all available sizes!

Authentic ATI ProCharger Pulley's in all available sizes! Includes retaining bolt, washer and key. Any BBC, SBC, or SBF (non-A/C) that uses a spring tensioner will be an offset pulley. The slide/fixed tensioner for any of the same application...

  • Price: $85.00

ATI PDW01C-150 - Blower Pulley .150 SHIMS (Qty 2)

ATI PDW01C-150 - Blower Pulley .150 SHIMS (Qty 2)

ATI PDW01C-150 - Blower Pulley .150 SHIMS (Qty 2) NOTE: To ensure belt alignment, verify that the supercharger has the proper shim between the supercharger pulley and the input shaft. Proper shim width is 0.200” for the 8 rib pulley (may be two shims with total width of 0.200”)!

  • Price: $7.50

ATI DC033I-001 G8 6 ECCENTRIC CAMS - CRANK PULLEY

ATI DC033I-001 G8 6 ECCENTRIC CAMS - CRANK PULLEY

ATI DC033I-001 G8 6 ECCENTRIC CAMS - CRANK PULLEY Note: Blower bracket, blower and belt are not included, this is for the six crank pulley cam locks. This is for those who need to replace their ProCharger supplied G8 cam locks

  • Price: $80.00

ATI BO07FI-018 - 8 & 12 Rib Blower Pulley Bolt

ATI BO07FI-018 - 8 & 12 rib Blower Pulley Bolt

ATI BO07FI-018 - 8 & 12 Rib Blower Pulley Bolt BO07FI-018 / 7/16 - 20 X 1-1/4" HEX GR8-YELLOW This is for the bolt only, does not include the washer

  • Price: $2.75

ATI DBxxxI-008 ProCharger 8 Rib Blower Belt

ATI DBxxxI-008 ProCharger 8 Rib Blower Belt

ATI DBxxxI-008 ProCharger 8 Rib Blower Belt These belts are currently only offered to those who know the ProCharger part number from their current belt. Please put the part number in the "notes" section of the order form. Systems that use...

  • Price: $49.95

ATI GF020I-011 - Blower Pulley key

ATI GF020I-011 - Blower Pulley key

ATI GF020I-011 - Blower Pulley key

  • Price: $4.00

ATI PCI04A-001 - Blower Pulley Washer

ATI PCI04A-001 - Blower Pulley Washer

ATI PCI04A-001 - Blower Pulley Washer

  • Price: $6.00

ATI PDW01C-100 - Blower Pulley .100 SHIMS (Qty 2)

ATI PDW01C-100 - Blower Pulley .100 SHIMS (Qty 2)

ATI PDW01C-100 - Blower Pulley .100 SHIMS (Qty 2) NOTE: To ensure belt alignment, verify that the supercharger has the proper shim between the supercharger pulley and the input shaft. Proper shim width is 0.200” for the 8 rib pulley (may be two shims with total width of 0.200”)!

  • Price: $7.50

ATI DC004A-008 3" IDLR PULLEY-8 RIB W/ BEARINGS

ATI DC004A-008 3" IDLR PULLEY-8 RIB W/ BEARINGS

ATI DC004A-008 3" IDLR PULLEY-8 RIB W/ BEARINGS (RIBBED PULLEY)

  • Price: $80.00