BMR RS002 05-14 MUSTANG/GT500 Tubular Radiator Support

BMR RS002 05-14 MUSTANG/GT500 Tubular Radiator Support

BMR RS002 05-14 MUSTANG/GT500 Tubular Radiator Support

BMR 05-14 MUSTANG/GT500 Tubular Radiator Support, remove 26.5 lbs. off the front end!



The Finer Details

Part Number: BMR RS002

Manufacturer: BMR Suspension

Condition: New

Weight: 5 lbs


$0.00
$89.95
Earn0
reward points


BMR RS002 05-14 MUSTANG/GT500 Tubular Radiator Support

Send this to a friend

BMR RS002 05-14 MUSTANG/GT500 Tubular Radiator Support


  • More Information

    LIGHTWEIGHT TUBULAR RADIATOR SUPPORT/SWAYBAR DELETE

    BMR RS002 05-14 MUSTANG/GT500 Tubular Radiator Support

    FREE SHIPPING!

    Remove 11 lbs. off the front end!

     Lightening the front end of your 2005-2014 Mustang is easy with a radiator support from BMR Suspension. If you are drag racing your S197 Mustang and don't need a front sway bar, our Radiator Support can save an additional 11 pounds off the front end of the car. The factory radiator support is built overly strong because it must also support the additional loads of the front sway bar. With the swaybar removed, the crossmember only needs to support the weight of the radiator. Our lightweight crossmember only weighs 5.5 pounds as compared the OE 16.5 pounds Combined with sway bar removal, expect a 26.5-pound. weight reduction!

    BMR designed the RS002 Radiator Support for street performance and drag race applications where a front sway bar is not used. This is a direct replacement for the factory S197 radiator support. Reducing front weight can help improve performance and front weight percentage. The RS002 is 100-percent bolt-on and requires no fabrication or modifications. When performance is a must, rely on BMR Suspension!

    BMR Suspension’s RS002 Radiator Support is available in black hammertone or red powdercoat for long-lasting good looks. Installation time is 1-2 hours. Proudly made in the U.S.A.

    Description

    If you are drag racing your new Mustang and don't need a front sway bar, our crossmember can save an additional 11 lbs. off the front end. The factory radiator crossmember is built overly strong because it must also support the additional loads of the front sway bar. With the swaybar removed, the crossmember only needs to support the weight of the radiator. Our lightweight crossmember only weighs 5.5 lbs. as compared the OE 16.5 lbs. Combined with sway bar removal, expect a 26.5 Lb. weight reduction!

    Easy 30-45 minute install. Allows the use of the factory bumper cover support plastic.

    Application
    2005 - 2014 Ford Mustang GT
    Manufactured By
    BMR Suspension | USA Made
     
    Available Colors
     Black Hammertone
     
     Red