BMR SP031 2" Lowering Springs for 1967-1972 A-Body

BMR Suspension 2” Lowering Springs for 1967-1972 A-Body

Improve the stance and handling capabilities of your A-Body with a set of Lowering Springs from BMR Suspension.  The front springs lower the vehicle by 2” and have a linear spring rate of 520 pounds per inch.  The rear springs also lower the vehicle by 2” and have a variable spring rate of 125-200 pounds per inch.  All BMR springs are cold wound from high tensile silicone chromium spring wire then shot-peened and computer tested for consistency.  A set of BMR Lowering Springs (SP031) will lower the center of gravity and dramatically increase the cornering capabilities of your A-Body without sacrificing ride quality.  Front springs and rear springs also sold separately. Installation time of 3-4 hours.  Available in red powdercoat finish.

Description (SP031):

Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling ability of your A-Body. BMR lowering springs are specifically designed to provide optimal handling without sacrificing ride quality. Our extensive development time produced what we feel to be the optimal rates for this application. By using a linear 520 lb/in front spring and a variable rate 125-200 lb/in rear spring the car responds with a firm yet comfortable ride with much improved handling characteristics.

All BMR springs are cold wound from high-tensile chrome silicon wire, stress relieved, compressed for permanent set then shot peened and computer tested. Some of these procedures are overkill but it ensures a long, trouble-free life with consistent rates and ride heights. Because of these features, BMR is able to offer a lifetime warranty against spring sag.

SP031

Description : Lowering spring kit, set of 4, 2" drop

Application : 1967-1972 Buick Gran Sport, Skylark, Sportwagon

Application : 1967-1972 Chevy Chevelle, Malibu, El Camino, Monte Carlo

Application : 1967-1972 Oldsmobile 442, Cutlass, Vista Cruiser

Application : 1967-1972 Pontiac GTO, LeMans, Tempest

Box Dimensions : 14" x 12” x 12”

Shipping Weight : 38 pounds

Department : Chassis & Suspension

Section : Suspension Components

Part Type : Lowering Springs

Brand : BMR Suspension

Spring Position : Front and Rear

Spring Type : Coil

Progressive Rate Spring, Front : No

Spring Rate, Front (lbs/in) : 521 lbs/in

Drop, Front : 2"

Progressive Rate Spring, Rear : Yes

Spring Rate, Rear (lbs/in) : 200 lbs/in

Drop, Rear : 2"

Bushings Included : No

Spring Finish : Red powdercoated

Quantity : Sold as a set of 4