BMR SP036 2" Front Lowering Springs 78-87 G Body/82-92 F Body
BMR SP036 2" Front Lowering Springs 78-87 G Body/82-92 F Body
BMR SP036 2” Front Lowering Springs 78-87 G Body/82-92 F Body
There is nothing like the aggressive look of a car with the right stance! Over time, stock
springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs
go beyond looks-your GM vehicle needs to perform, too! All BMR springs are
manufactured from chrome silicon high-tensile spring wire, and are cold wound on a
CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time
to ensure that every spring is exactly the same. This guarantees that your right spring
matches your left spring. Every BMR spring is compressed solid at the factory, not
once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR
springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the
winding process are eliminated. All springs are then shot-peened to eliminate residual
surface stresses. Many spring manufacturers skip this step, but BMR insists on this
operation as part of our spring manufacturing process. Every spring is computer tested
as the last step-every spring, not just a sample from each batch. Each spring is loaded
in the spring tester at the factory, then compressed and the CNC load cell measures the
force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY
against spring sag.
Blending aesthetics and performance, BMR has designed the SP036 for the street
performance crowd who want to use their cars in a variety of application. These springs feature
a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate
offers plenty of support, keeping the body flat and level in the corners, while remaining soft
enough for a comfortable ride on any road. When performance and looks are a must,
rely on BMR Suspension!
BMR Suspension's SP036 lowering springs are available in red powdercoat for long-
lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.
Features:
- Lowers the front of your 1978-1987 GM G-body 1.5-inch
- Lowers the front of your 1982-1992 GM F-body 1.25-inch
- Improves handling and ride quality
- Manufactured from chrome silicon high-tensile spring wire
- Cold wound on a CNC Coiling Machine to exact specifications
- Lifetime warranty against spring sag
- Stress-relieved at 750 degrees F
- Shot-peened
- Computer tested for accurate height and spring rate
- Made in the U.S.A.
SP036R
Description: Lowering springs, front
Application: 1978-1987 GM G-Body
Application: 1982-1992 GM F-Body
Box Dimensions: 14" x 10" x 8"
Shipping Weight: 31 pounds
Department: Chassis & Suspension
Section: Suspension Components
Part Type: Lowering Springs
Brand: BMR Suspension
Spring Position: Front
Spring Type: Coil
Progressive Rate Spring, Front: No
Spring Rate, Front (lbs/in): 620
Drop, Front: 1.5" (1978-1987 GM G-Body)
Drop, Front: 1.25" (1982-1992 GM F-Body)
Bushings Included: No
Spring Finish: Red powdercoated
Quantity: Sold as a pair
The Finer Details
Part Number: BMR SP036
Manufacturer: BMR Suspension
Condition: New
Weight: 25 lbs
$0.00
$179.95
Send this to a friend
BMR SP036 2" Front Lowering Springs 78-87 G Body/82-92 F Body