BMR SP112 08-23 Challenger/06-23 Charger Lowering springs, Rear, 1.25" Drop

BMR SP112 08-23 Challenger/06-23 Charger Lowering springs, Rear, 1.25" Drop

BMR SP112 08-23 Challenger/06-23 Charger  Lowering springs, Rear, 1.25" Drop, performance version

- Lowers the rear of your V8-equipped 08-23 Challenger/06-23 Charger  1.25-inch
- Improves handling and ride quality
- 720 lb/in spring rate
- Manufactured from chrome silicon high-tensile spring wire
- Cold wound on a CNC Coiling Machine to exact specifications
- Lifetime warranty against spring sag
- Stress-relieved at 750 degrees F
- Shot-peened
- Computer tested for accurate height and spring rate
- Fits V8 Models Only
- Made in the U.S.A.

Description:Lowering springs, rear, 1.25" drop, performance version
Application:08-23 Challenger/06-23 Charger 
Box Dimensions:14" x 10" x 8"
Shipping Weight:20 pounds
Department:Chassis & Suspension
Section:Suspension Components
Part Type:Lowering Springs
Brand:BMR Suspension
Spring Position:Rear
Spring Type:Coil
Progressive Rate Spring, Rear:No
Spring Rate, Rear (lbs/in):720 lbs/in
Drop, Rear:1.25"
Bushings Included:No
Spring Finish:Red powdercoated
Quantity:Sold as a pair

There is nothing like the aggressive look of a car with the right stance! Over time, stock 
springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs 
go beyond looks-your Challenger/Charger needs to perform, too! BMR springs are manufactured 
from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling 
machine. The CNC coiling head can adjust the spring diameter in real time to ensure 
that every spring is exactly the same. This guarantees that your right spring matches 
your left spring. Every BMR spring is compressed solid at the factory, not once, but 
twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are 
stress-relieved at 750 degrees F, ensuring most stresses induced during the winding 
process are eliminated. All springs are then shot-peened to eliminate residual surface 
stresses. Many spring manufacturers skip this step, but BMR insists on this operation as 
part of our spring manufacturing process. Every spring is computer tested as the last 
step-every spring, not just a sample from each batch. Each spring is loaded in the 
spring tester at the factory, then compressed and the CNC load cell measures the force 
for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY 
against spring sag.
Blending aesthetics and performance, BMR has designed the SP110 for the street 
performance crowd who want to use their cars in a variety of application. These springs 
will lower your Challenger/Charger, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. 
When performance and looks are a must, rely on BMR Suspension!
BMR Suspension's SP110 lowering springs are available in red powdercoat for long-
lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.

The Finer Details

Part Number: BMR SP112

Manufacturer: BMR Suspension

Condition: New

reward points

Send this to a friend

BMR SP112 08-23 Challenger/06-23 Charger Lowering springs, Rear, 1.25" Drop