BMR TCA049 79-98 Mustang Lower control arms, DOM, single adj, po

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension.
Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension.
Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension.

BMR TCA049 79-98 Mustang Lower control arms, DOM, single adj, po

BMR TCA049 79-98 Mustang Lower control arms, DOM, single adj, poly/rod end TCA049H TCA049R Product Name: Lower control arms, DOM, single adj, poly/rod end Product Description: Launching harder, reducing wheel hop, and adding cornering...



The Finer Details

Part Number: BMR TCA049

Manufacturer: BMR Suspension

Condition: New

Weight: 5 lbs

$0.00
$299.95
Earn0
reward points
Add To Your Wishlist
Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension.

Send this to a friend

BMR TCA049 79-98 Mustang Lower control arms, DOM, single adj, po


  • More Information

     

    BMR TCA049 79-98 Mustang Lower control arms, DOM, single adj, poly/rod end

    TCA049H
    TCA049R

    Product Name:
    Lower control arms, DOM, single adj, poly/rod end

    Product Description:
    Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-
    1998 Mustang is easy with lower control arms from BMR Suspension. Stock stamped
    steel control arms with soft rubber bushings deflect under load and absorb power
    instead of transferring it to the tires. BMR's polyurethane/rod end, single-adjustable
    tubular control arms for Fox body Mustangs (TCA049) are manufactured from heavy-
    duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that
    greatly improves performance, with the adjustability to fine-tune the rear axle alignment.
    The integrated spring perch is built from heavy-duty plate steel for loads of strength.
    Greasable, 95-durometer bushings add a solid, more responsive feel over the stock
    rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly
    coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing,
    keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable
    operation over the life of the bushings.

    BMR Suspension designed the TCA049 to work well in street performance, drag race,
    and road race applications. The stock control arms flex under cornering loads giving you
    inconsistent handling characteristics. Combine this with soft bushings that have massive
    amounts of deflection and you're left with poor performance. The TCA049's heavy-duty
    construction eliminates control arm flex, giving you much improved repeatability on the
    street, starting line, or in the corners. BMR's polyurethane bushings are designed to be
    compliant enough to give you a comfortable ride and absorb NVH, while remaining firm
    enough to stand up to high loads of any performance environment. The bushings and
    rod ends easily handle the high compression loads of hard launches and hard
    acceleration, yet offer plenty of articulation for great handling. These are the perfect
    upgrade for the enthusiast looking to improve performance at an affordable price, while
    maintaining acceptable NVH levels and ride quality. When performance is a must, rely
    on BMR Suspension!

    BMR Suspension's TCA049 single-adjustable polyurethane lower control arms are
    available in red and black hammertone powdercoat for long-lasting good looks.
    Installation time is about 1-2 hours. Proudly made in the U.S.A.

    Features:
    - Fits all Fox Body Mustangs (1979-1998)
    - Single-adjustable design
    - High-durometer internally fluted polyurethane greasable bushings
    - Heavy-duty Teflon-lined rods ends
    - CNC-machines rod ends spacers
    - MIG-welded 1 5/8-inch DOM steel tubing
    - Dramatically reduces control arms flex
    - Greatly reduces bushing deflection
    - Improved Performance with acceptable NVH levels
    - Designed for street performance, drag race, and road race applications
    - Durable powdercoat finish
    - 1-2 hour installation time
    - Proudly designed in the U.S.A.
    - Proudly made in the U.S.A.
    TCA049H
    Description: Lower control arms, DOM, single adj, poly/rod end
    Application: 1979-1998 Mustang
    Box Dimensions: 29" x 6" x 6"
    Shipping Weight: 14 pounds
    Department: Chassis & Suspension
    Section: Suspension Components
    Part Type: Control Arms
    Brand: BMR Suspension
    Control Arm Style: Tubular
    Ball Joint Included: No
    Adjustable: Yes
    Hardware Included: No
    Control Arm Material: Steel
    Control Arm Finish: Black hammertone powdercoat
    Bushings Included: Yes
    Bushing Material: Steel rod ends / polyurethane
    Quantity: Sold as a pair

    TCA049R
    Description: Lower control arms, DOM, single adj, poly/rod end
    Application: 1979-1998 Mustang
    Box Dimensions: 29" x 6" x 6"
    Shipping Weight: 14 pounds
    Department: Chassis & Suspension
    Section: Suspension Components
    Part Type: Control Arms
    Brand: BMR Suspension
    Control Arm Style: Tubular
    Ball Joint Included: No
    Adjustable: Yes
    Hardware Included: No
    Control Arm Material: Steel
    Control Arm Finish: Red powdercoat
    Bushings Included: Yes
    Bushing Material: Steel rod ends / polyurethane
    Quantity: Sold as a pair